perlfaq2 - Obtaining and Learning about Perl
perlfaq2 - Obtaining and Learning about Perl ($Revision: 1.32 $, $Date: 1999/10/14 18:46:09 $)
This section of the FAQ answers questions about where to find source and documentation for Perl, support, and related matters.
The standard release of Perl (the one maintained by the perl development team) is distributed only in source code form. You can find this at http://www.cpan.org/src/latest.tar.gz , which is in a standard Internet format (a gzipped archive in POSIX tar format).
Perl builds and runs on a bewildering number of platforms. Virtually all known and current Unix derivatives are supported (Perl's native platform), as are other systems like VMS, DOS, OS/2, Windows, QNX, BeOS, OS X, MPE/iX and the Amiga.
Binary distributions for some proprietary platforms, including Apple systems, can be found http://www.cpan.org/ports/ directory. Because these are not part of the standard distribution, they may and in fact do differ from the base Perl port in a variety of ways. You'll have to check their respective release notes to see just what the differences are. These differences can be either positive (e.g. extensions for the features of the particular platform that are not supported in the source release of perl) or negative (e.g. might be based upon a less current source release of perl).
If you don't have a C compiler because your vendor for whatever reasons did not include one with your system, the best thing to do is grab a binary version of gcc from the net and use that to compile perl with. CPAN only has binaries for systems that are terribly hard to get free compilers for, not for Unix systems.
Some URLs that might help you are:
Someone looking for a Perl for Win16 might look to Laszlo Molnar's djgpp port in http://www.cpan.org/ports/#msdos , which comes with clear installation instructions. A simple installation guide for MS-DOS using Ilya Zakharevich's OS/2 port is available at http://www.cs.ruu.nl/%7Epiet/perl5dos.html and similarly for Windows 3.1 at http://www.cs.ruu.nl/%7Epiet/perlwin3.html .
Since you don't have a C compiler, you're doomed and your vendor should be sacrificed to the Sun gods. But that doesn't help you.
What you need to do is get a binary version of gcc for your system first. Consult the Usenet FAQs for your operating system for information on where to get such a binary version.
That's probably because you forgot libraries, or library paths differ.
You really should build the whole distribution on the machine it will
eventually live on, and then type
make install. Most other
approaches are doomed to failure.
One simple way to check that things are in the right place is to print out the hard-coded @INC that perl looks through for libraries:
% perl -e 'print join("\n",@INC)'
If this command lists any paths that don't exist on your system, then you may need to move the appropriate libraries to these locations, or create symbolic links, aliases, or shortcuts appropriately. @INC is also printed as part of the output of
% perl -V
You might also want to check out How do I keep my own module/library directory? in the perlfaq8 manpage.
Read the INSTALL file, which is part of the source distribution. It describes in detail how to cope with most idiosyncrasies that the Configure script can't work around for any given system or architecture.
CPAN stands for Comprehensive Perl Archive Network, a ~700mb archive replicated on nearly 200 machines all over the world. CPAN contains source code, non-native ports, documentation, scripts, and many third-party modules and extensions, designed for everything from commercial database interfaces to keyboard/screen control to web walking and CGI scripts. The master web site for CPAN is http://www.cpan.org/ and there is the CPAN Multiplexer at http://www.perl.com/CPAN/CPAN.html which will choose a mirror near you via DNS. See http://www.perl.com/CPAN (without a slash at the end) for how this process works. Also, http://mirror.cpan.org/ has a nice interface to the http://www.cpan.org/MIRRORED.BY mirror directory.
See the CPAN FAQ at http://www.cpan.org/misc/cpan-faq.html for answers to the most frequently asked questions about CPAN including how to become a mirror.
CPAN/path/... is a naming convention for files available on CPAN sites. CPAN indicates the base directory of a CPAN mirror, and the rest of the path is the path from that directory to the file. For instance, if you're using ftp://ftp.funet.fi/pub/languages/perl/CPAN as your CPAN site, the file CPAN/misc/japh is downloadable as ftp://ftp.funet.fi/pub/languages/perl/CPAN/misc/japh .
Considering that there are close to two thousand existing modules in the archive, one probably exists to do nearly anything you can think of. Current categories under CPAN/modules/by-category/ include Perl core modules; development support; operating system interfaces; networking, devices, and interprocess communication; data type utilities; database interfaces; user interfaces; interfaces to other languages; filenames, file systems, and file locking; internationalization and locale; world wide web support; server and daemon utilities; archiving and compression; image manipulation; mail and news; control flow utilities; filehandle and I/O; Microsoft Windows modules; and miscellaneous modules.
See http://www.cpan.org/modules/00modlist.long.html or http://search.cpan.org/ for a more complete list of modules by category.
Certainly not. Larry expects that he'll be certified before Perl is.
The complete Perl documentation is available with the Perl distribution.
If you have Perl installed locally, you probably have the documentation
installed as well: type
man perl if you're on a system resembling Unix.
This will lead you to other important man pages, including how to set your
$MANPATH. If you're not on a Unix system, access to the documentation
will be different; for example, documentation might only be in HTML format. All
proper Perl installations have fully-accessible documentation.
You might also try
perldoc perl in case your system doesn't
have a proper man command, or it's been misinstalled. If that doesn't
work, try looking in /usr/local/lib/perl5/pod for documentation.
If all else fails, consult http://perldoc.cpan.org/ or http://www.perldoc.com/ both offer the complete documentation in html format.
Many good books have been written about Perl--see the section below for more details.
Tutorial documents are included in current or upcoming Perl releases include the perltoot manpage for objects or the perlboot manpage for a beginner's approach to objects, the perlopentut manpage for file opening semantics, the perlreftut manpage for managing references, the perlretut manpage for regular expressions, the perlthrtut manpage for threads, the perldebtut manpage for debugging, and the perlxstut manpage for linking C and Perl together. There may be more by the time you read this. The following URLs might also be of assistance:
http://perldoc.cpan.org/ http://www.perldoc.com/ http://reference.perl.com/query.cgi?tutorials http://bookmarks.cpan.org/search.cgi?cat=Training%2FTutorials
The now defunct comp.lang.perl newsgroup has been superseded by the following groups:
comp.lang.perl.announce Moderated announcement group comp.lang.perl.misc Very busy group about Perl in general comp.lang.perl.moderated Moderated discussion group comp.lang.perl.modules Use and development of Perl modules comp.lang.perl.tk Using Tk (and X) from Perl
comp.infosystems.www.authoring.cgi Writing CGI scripts for the Web.
There is also Usenet gateway to the mailing list used by the crack Perl development team (perl5-porters) at news://news.perl.com/perl.porters-gw/ .
You should post source code to whichever group is most appropriate, but feel free to cross-post to comp.lang.perl.misc. If you want to cross-post to alt.sources, please make sure it follows their posting standards, including setting the Followup-To header line to NOT include alt.sources; see their FAQ (http://www.faqs.org/faqs/alt-sources-intro/) for details.
If you're just looking for software, first use Google (http://www.google.com), Deja (http://www.deja.com), and CPAN Search (http://search.cpan.org). This is faster and more productive than just posting a request.
A number of books on Perl and/or CGI programming are available. A few of these are good, some are OK, but many aren't worth your money. Tom Christiansen maintains a list of these books, some with extensive reviews, at http://www.perl.com/perl/critiques/index.html .
The incontestably definitive reference book on Perl, written by the creator of Perl, is now (July 2000) in its third edition:
Programming Perl (the "Camel Book"): by Larry Wall, Tom Christiansen, and Jon Orwant 0-596-00027-8 [3rd edition July 2000] http://www.oreilly.com/catalog/pperl3/ (English, translations to several languages are also available)
The companion volume to the Camel containing thousands of real-world examples, mini-tutorials, and complete programs is:
The Perl Cookbook (the "Ram Book"): by Tom Christiansen and Nathan Torkington, with Foreword by Larry Wall ISBN 1-56592-243-3 [1st Edition August 1998] http://perl.oreilly.com/cookbook/
If you're already a hard-core systems programmer, then the Camel Book might suffice for you to learn Perl from. If you're not, check out
Learning Perl (the "Llama Book"): by Randal Schwartz and Tom Christiansen with Foreword by Larry Wall ISBN 1-56592-284-0 [2nd Edition July 1997] http://www.oreilly.com/catalog/lperl2/
Despite the picture at the URL above, the second edition of ``Llama Book'' really has a blue cover and was updated for the 5.004 release of Perl. Various foreign language editions are available, including Learning Perl on Win32 Systems (the ``Gecko Book'').
If you're not an accidental programmer, but a more serious and possibly even degreed computer scientist who doesn't need as much hand-holding as we try to provide in the Llama or its defurred cousin the Gecko, please check out the delightful book, Perl: The Programmer's Companion, written by Nigel Chapman.
Addison-Wesley (http://www.awlonline.com/) and Manning (http://www.manning.com/) are also publishers of some fine Perl books such as Object Oriented Programming with Perl by Damian Conway and Network Programming with Perl by Lincoln Stein.
An excellent technical book discounter is Bookpool at http://www.bookpool.com/ where a 30% discount or more is not unusual.
What follows is a list of the books that the FAQ authors found personally useful. Your mileage may (but, we hope, probably won't) vary.
Recommended books on (or mostly on) Perl follow.
Programming Perl by Larry Wall, Tom Christiansen, and Jon Orwant ISBN 0-596-00027-8 [3rd edition July 2000] http://www.oreilly.com/catalog/pperl3/
Perl 5 Pocket Reference by Johan Vromans ISBN 0-596-00032-4 [3rd edition May 2000] http://www.oreilly.com/catalog/perlpr3/
Perl in a Nutshell by Ellen Siever, Stephan Spainhour, and Nathan Patwardhan ISBN 1-56592-286-7 [1st edition December 1998] http://www.oreilly.com/catalog/perlnut/
Elements of Programming with Perl by Andrew L. Johnson ISBN 1884777805 [1st edition October 1999] http://www.manning.com/Johnson/
Learning Perl by Randal L. Schwartz and Tom Christiansen with foreword by Larry Wall ISBN 1-56592-284-0 [2nd edition July 1997] http://www.oreilly.com/catalog/lperl2/
Learning Perl on Win32 Systems by Randal L. Schwartz, Erik Olson, and Tom Christiansen, with foreword by Larry Wall ISBN 1-56592-324-3 [1st edition August 1997] http://www.oreilly.com/catalog/lperlwin/
Perl: The Programmer's Companion by Nigel Chapman ISBN 0-471-97563-X [1st edition October 1997] http://catalog.wiley.com/title.cgi?isbn=047197563X
Cross-Platform Perl by Eric Foster-Johnson ISBN 1-55851-483-X [2nd edition September 2000] http://www.pconline.com/~erc/perlbook.htm
MacPerl: Power and Ease by Vicki Brown and Chris Nandor, with foreword by Matthias Neeracher ISBN 1-881957-32-2 [1st edition May 1998] http://www.macperl.com/ptf_book/
The Perl Cookbook by Tom Christiansen and Nathan Torkington with foreword by Larry Wall ISBN 1-56592-243-3 [1st edition August 1998] http://www.oreilly.com/catalog/cookbook/
Effective Perl Programming by Joseph Hall ISBN 0-201-41975-0 [1st edition 1998] http://www.awl.com/
Mastering Regular Expressions by Jeffrey E. F. Friedl ISBN 1-56592-257-3 [1st edition January 1997] http://www.oreilly.com/catalog/regex/
Network Programming with Perl by Lincoln Stein ISBN 0-201-61571-1 [1st edition 2001] http://www.awlonline.com/
Object Oriented Perl Damian Conway with foreword by Randal L. Schwartz ISBN 1884777791 [1st edition August 1999] http://www.manning.com/Conway/
Data Munging with Perl Dave Cross ISBN 1930110006 [1st edition 2001] http://www.manning.com/cross
Learning Perl/Tk by Nancy Walsh ISBN 1-56592-314-6 [1st edition January 1999] http://www.oreilly.com/catalog/lperltk/
The first and only periodical devoted to All Things Perl, The Perl Journal contained tutorials, demonstrations, case studies, announcements, contests, and much more. TPJ had columns on web development, databases, Win32 Perl, graphical programming, regular expressions, and networking, and sponsored the Obfuscated Perl Contest. Sadly, this publication is no longer in circulation, but should it be resurrected, it will most likely be announced on http://use.perl.org/ .
Beyond this, magazines that frequently carry high-quality articles on Perl are Web Techniques (see http://www.webtechniques.com/), Performance Computing (http://www.performance-computing.com/), and Usenix's newsletter/magazine to its members, login:, at http://www.usenix.org/. Randal's Web Technique's columns are available on the web at http://www.stonehenge.com/merlyn/WebTechniques/ .
To get the best performance, pick a site from the list below and use it to grab the complete list of mirror sites which is at /CPAN/MIRRORED.BY or at http://mirror.cpan.org/. From there you can find the quickest site for you. Remember, the following list is not the complete list of CPAN mirrors (the complete list contains 165 sites as of January 2001):
http://www.cpan.org/ http://www.perl.com/CPAN/ http://download.sourceforge.net/mirrors/CPAN/ ftp://ftp.digital.com/pub/plan/perl/CPAN/ ftp://ftp.flirble.org/pub/languages/perl/CPAN/ ftp://ftp.uvsq.fr/pub/perl/CPAN/ ftp://ftp.funet.fi/pub/languages/perl/CPAN/ ftp://ftp.dti.ad.jp/pub/lang/CPAN/ ftp://mirror.aarnet.edu.au/pub/perl/CPAN/ ftp://cpan.if.usp.br/pub/mirror/CPAN/
One may also use xx.cpan.org where ``xx'' is the 2-letter country code for your domain; e.g. Australia would use au.cpan.org.
Most of the major modules (Tk, CGI, libwww-perl) have their own mailing lists. Consult the documentation that came with the module for subscription information.
Have you tried Deja or AltaVista? Those are the best archives. Just look up ``*perl*'' as a newsgroup.
You might want to trim that down a bit, though.
You'll probably want more a sophisticated query and retrieval mechanism than a file listing, preferably one that allows you to retrieve articles using a fast-access indices, keyed on at least author, date, subject, thread (as in ``trn'') and probably keywords. The best solution the FAQ authors know of is the MH pick command, but it is very slow to select on 18000 articles.
If you have, or know where can be found, the missing sections, please let email@example.com know.
In a real sense, Perl already is commercial software: it has a license that you can grab and carefully read to your manager. It is distributed in releases and comes in well-defined packages. There is a very large user community and an extensive literature. The comp.lang.perl.* newsgroups and several of the mailing lists provide free answers to your questions in near real-time. Perl has traditionally been supported by Larry, scores of software designers and developers, and myriads of programmers, all working for free to create a useful thing to make life better for everyone.
However, these answers may not suffice for managers who require a purchase order from a company whom they can sue should anything go awry. Or maybe they need very serious hand-holding and contractual obligations. Shrink-wrapped CDs with Perl on them are available from several sources if that will help. For example, many Perl books include a distribution of Perl, as do the O'Reilly Perl Resource Kits (in both the Unix flavor and in the proprietary Microsoft flavor); the free Unix distributions also all come with Perl.
Alternatively, you can purchase commercial incidence based support through the Perl Clinic. The following is a commercial from them:
``The Perl Clinic is a commercial Perl support service operated by ActiveState Tool Corp. and The Ingram Group. The operators have many years of in-depth experience with Perl applications and Perl internals on a wide range of platforms.
``Through our group of highly experienced and well-trained support engineers, we will put our best effort into understanding your problem, providing an explanation of the situation, and a recommendation on how to proceed.''
Contact The Perl Clinic at
North America Pacific Standard Time (GMT-8) Tel: 1 604 606-4611 hours 8am-6pm Fax: 1 604 606-4640
Europe (GMT) Tel: 00 44 1483 862814 Fax: 00 44 1483 862801
See also www.perl.com for updates on tutorials, training, and support.
If you are reporting a bug in the perl interpreter or the modules shipped with Perl, use the perlbug program in the Perl distribution or mail your report to firstname.lastname@example.org .
If you are posting a bug with a non-standard port (see the answer to ``What platforms is Perl available for?''), a binary distribution, or a non-standard module (such as Tk, CGI, etc), then please see the documentation that came with it to determine the correct place to post bugs.
perlbug(1) man page (perl5.004 or later) for more information.
The Perl Home Page at http://www.perl.com/ is currently hosted on a T3 line courtesy of Songline Systems, a software-oriented subsidiary of O'Reilly and Associates. Other starting points include
http://language.perl.com/ http://conference.perl.com/ http://reference.perl.com/
Perl Mongers is an advocacy organization for the Perl language which maintains the web site http://www.perl.org/ as a general advocacy site for the Perl language.
Perl Mongers uses the pm.org domain for services related to Perl user groups, including the hosting of mailing lists and web sites. See the Perl user group web site at http://www.pm.org/ for more information about joining, starting, or requesting services for a Perl user group.
Perl Mongers also maintain the perl.org domain to provide general support services to the Perl community, including the hosting of mailing lists, web sites, and other services. The web site http://www.perl.org/ is a general advocacy site for the Perl language, and there are many other sub-domains for special topics, such as
http://bugs.perl.org/ http://history.perl.org/ http://lists.perl.org/ http://news.perl.org/ http://use.perl.org/
Copyright (c) 1997-2001 Tom Christiansen and Nathan Torkington. All rights reserved.
When included as an integrated part of the Standard Distribution of Perl or of its documentation (printed or otherwise), this works is covered under Perl's Artistic License. For separate distributions of all or part of this FAQ outside of that, see the perlfaq manpage.
Irrespective of its distribution, all code examples here are in the public domain. You are permitted and encouraged to use this code and any derivatives thereof in your own programs for fun or for profit as you see fit. A simple comment in the code giving credit to the FAQ would be courteous but is not required.
perlfaq2 - Obtaining and Learning about Perl