Полезная информация

next up previous contents
Next: name Up: The Scsi_Host Structure Previous: The Scsi_Host Structure

Variables in the Scsi_Host structure

In general, the variables in the Scsi_Host structure are not used until after the detect() function (see section gif) is called. Therefore, any variables which cannot be assigned before host adapter detection should be assigned during detection. This situation might occur, for example, if a single driver provided support for several host adapters with very similar characteristics. Some of the parameters in the Scsi_Host structure might then depend on the specific host adapter detected.





Converted on:
Mon Apr 1 10:20:16 EST 1996