There are a lot of configuration parameters that affect the behavior of the database system. Here we describe how to set them and the following subsections will discuss each in detail.
All parameter names are case-insensitive. Every parameter takes a value of one of the four types: Boolean, integer, floating point, and string. Boolean values are ON, OFF, TRUE, FALSE, YES, NO, 1, 0 (case-insensitive) or any non-ambiguous prefix of these.
One way to set these options is to edit the file postgresql.conf in the data directory. (A default file is installed there.) An example of what this file might look like is:
# This is a comment log_connections = yes syslog = 2
As you see, options are one per line. The equal sign between name and value is optional. Whitespace is insignificant and blank lines are ignored. Hash marks ("#") introduce comments anywhere.
The configuration file is reread whenever the postmaster receives a SIGHUP signal (which is most easily sent by means of pg_ctl reload). The postmaster also propagates this signal to all currently running backend processes so that existing sessions also get the new value. Alternatively, you can send the signal to a single backend process directly.
A second way to set these configuration parameters is to give them as a command line option to the postmaster, such as:
postmaster -c log_connections=yes -c syslog=2
which would have the same effect as the previous example. Command-line options override any conflicting settings in postgresql.conf.
Occasionally it is also useful to give a command line option to one particular backend session only. The environment variable PGOPTIONS can be used for this purpose on the client side:
env PGOPTIONS='-c geqo=off' psql
(This works for any client application, not just psql.) Note that this won't work for options that are fixed when the server is started, such as the port number.
Some options can be changed in individual SQL sessions with the SET command, for example:
=> SET ENABLE_SEQSCAN TO OFF;
See the SQL command language reference for details on the syntax. Furthermore, it is possible to assign a set of option settings to a user or a database. Whenever a session is started, the default settings for the user and database involved are loaded. The commands ALTER DATABASE and ALTER USER, respectively, are used to configure these.
Sets the query optimizer's estimate of the cost of processing each index tuple during an index scan. This is measured as a fraction of the cost of a sequential page fetch.
Sets the optimizer's estimate of the cost of processing each operator in a WHERE clause. This is measured as a fraction of the cost of a sequential page fetch.
Sets the query optimizer's estimate of the cost of processing each tuple during a query. This is measured as a fraction of the cost of a sequential page fetch.
Sets the optimizer's assumption about the effective size of the disk cache (that is, the portion of the kernel's disk cache that will be used for PostgreSQL data files). This is measured in disk pages, which are normally 8 kB each.
Enables or disables the query planner's use of hash-join plan types. The default is on. This is used for debugging the query planner.
Enables or disables the query planner's use of index-scan plan types. The default is on. This is used to debugging the query planner.
Enables or disables the query planner's use of merge-join plan types. The default is on. This is used for debugging the query planner.
Enables or disables the query planner's use of nested-loop join plans. It's not possible to suppress nested-loop joins entirely, but turning this variable off discourages the planner from using one if there are other methods available. The default is on. This is used for debugging the query planner.
Enables or disables the query planner's use of sequential scan plan types. It's not possible to suppress sequential scans entirely, but turning this variable off discourages the planner from using one if there are other methods available. The default is on. This is used for debugging the query planner.
Enables or disables the query planner's use of explicit sort steps. It's not possible to suppress explicit sorts entirely, but turning this variable off discourages the planner from using one if there are other methods available. The default is on. This is used for debugging the query planner.
Enables or disables the query planner's use of TID scan plan types. The default is on. This is used for debugging the query planner.
Enables or disables genetic query optimization, which is an algorithm that attempts to do query planning without exhaustive searching. This is on by default. See also the various other GEQO_ settings.
Various tuning parameters for the genetic query optimization algorithm: The pool size is the number of individuals in one population. Valid values are between 128 and 1024. If it is set to 0 (the default) a pool size of 2^(QS+1), where QS is the number of FROM items in the query, is taken. The effort is used to calculate a default for generations. Valid values are between 1 and 80, 40 being the default. Generations specifies the number of iterations in the algorithm. The number must be a positive integer. If 0 is specified then Effort * Log2(PoolSize) is used. The run time of the algorithm is roughly proportional to the sum of pool size and generations. The selection bias is the selective pressure within the population. Values can be from 1.50 to 2.00; the latter is the default. The random seed can be set to get reproducible results from the algorithm. If it is set to -1 then the algorithm behaves non-deterministically.
Use genetic query optimization to plan queries with at least this many FROM items involved. (Note that a JOIN construct counts as only one FROM item.) The default is 11. For simpler queries it is usually best to use the deterministic, exhaustive planner. This parameter also controls how hard the optimizer will try to merge subquery FROM clauses into the upper query.
The Key Set Query Optimizer (KSQO) causes the query planner to convert queries whose WHERE clause contains many OR'ed AND clauses (such as WHERE (a=1 AND b=2) OR (a=2 AND b=3) ...) into a union query. This method can be faster than the default implementation, but it doesn't necessarily give exactly the same results, since UNION implicitly adds a SELECT DISTINCT clause to eliminate identical output rows. KSQO is commonly used when working with products like Microsoft Access, which tend to generate queries of this form.
The KSQO algorithm used to be absolutely essential for queries with many OR'ed AND clauses, but in PostgreSQL 7.0 and later the standard planner handles these queries fairly successfully; hence the default is off.
Sets the query optimizer's estimate of the cost of a nonsequentially fetched disk page. This is measured as a multiple of the cost of a sequential page fetch.
Note: Unfortunately, there is no well-defined method for determining ideal values for the family of "COST" variables that were just described. You are encouraged to experiment and share your findings.
This controls how much detail is written to the server logs. The default is NOTICE. Valid values are DEBUG5, DEBUG4, DEBUG3, DEBUG2, DEBUG1, INFO, NOTICE, WARNING, ERROR, LOG, FATAL, and PANIC. Later values send less detail to the logs. LOG has a different precedence here than in CLIENT_MIN_MESSAGES.
This controls how much detail is written to the client. The default is NOTICE. Valid values are DEBUG5, DEBUG4, DEBUG3, DEBUG2, DEBUG1, LOG, NOTICE, WARNING, and ERROR. Later values send less information to the user. LOG has a different precedence here than in SERVER_MIN_MESSAGES.
Turns on various assertion checks. This is a debugging aid. If you are experiencing strange problems or crashes you might want to turn this on, as it might expose programming mistakes. To use this option, the macro USE_ASSERT_CHECKING must be defined when PostgreSQL is built (see the configure option --enable-cassert). Note that DEBUG_ASSERTIONS defaults to on if PostgreSQL has been built this way.
These flags enable various debugging output to be sent to the server log. For each executed query, prints either the query text, the resulting parse tree, the query rewriter output, or the execution plan. DEBUG_PRETTY_PRINT indents these displays to produce a more readable but much longer output format.
Determines whether EXPLAIN VERBOSE uses the indented or non-indented format for displaying detailed querytree dumps.
By default, connection logs only show the IP address of the connecting host. If you want it to show the host name you can turn this on, but depending on your host name resolution setup it might impose a non-negligible performance penalty. This option can only be set at server start.
This outputs a line to the server logs detailing each successful connection. This is off by default, although it is probably very useful. This option can only be set at server start or in the postgresql.conf configuration file.
Prefixes each server log message with the process ID of the backend process. This is useful to sort out which messages pertain to which connection. The default is off.
Prefixes each server log message with a time stamp. The default is off.
For each query, write performance statistics of the respective module to the server log. This is a crude profiling instrument.
Shows the outgoing port number of the connecting host in the connection log messages. You could trace back the port number to find out what user initiated the connection. Other than that, it's pretty useless and therefore off by default. This option can only be set at server start.
These flags determine what information backends send to the statistics collector process: current commands, block-level activity statistics, or row-level activity statistics. All default to off. Enabling statistics collection costs a small amount of time per query, but is invaluable for debugging and performance tuning.
If on, collected statistics are zeroed out whenever the server is restarted. If off, statistics are accumulated across server restarts. The default is on. This option can only be set at server start.
Controls whether the server should start the statistics-collection subprocess. This is on by default, but may be turned off if you know you have no interest in collecting statistics. This option can only be set at server start.
PostgreSQL allows the use of syslog for logging. If this option is set to 1, messages go both to syslog and the standard output. A setting of 2 sends output only to syslog. (Some messages will still go to the standard output/error.) The default is 0, which means syslog is off. This option must be set at server start.
To use syslog, the build of PostgreSQL must be configured with the --enable-syslog option.
This option determines the syslog "facility" to be used when syslog is enabled. You may choose from LOCAL0, LOCAL1, LOCAL2, LOCAL3, LOCAL4, LOCAL5, LOCAL6, LOCAL7; the default is LOCAL0. See also the documentation of your system's syslog.
If logging to syslog is enabled, this option determines the program name used to identify PostgreSQL messages in syslog log messages. The default is postgres.
Generates a great amount of debugging output for the LISTEN and NOTIFY commands.
If set to true, CST, EST, and SAT are interpreted as Australian time zones rather than as North American Central/Eastern time zones and Saturday. The default is false.
Maximum time to complete client authentication, in seconds. If a would-be client has not completed the authentication protocol in this much time, the server breaks the connection. This prevents hung clients from occupying a connection indefinitely. This option can only be set at server start or in the postgresql.conf file.
This is the amount of time, in milliseconds, to wait on a lock before checking to see if there is a deadlock condition. The check for deadlock is relatively slow, so the server doesn't run it every time it waits for a lock. We (optimistically?) assume that deadlocks are not common in production applications and just wait on the lock for a while before starting check for a deadlock. Increasing this value reduces the amount of time wasted in needless deadlock checks, but slows down reporting of real deadlock errors. The default is 1000 (i.e., one second), which is probably about the smallest value you would want in practice. On a heavily loaded server you might want to raise it. Ideally the setting should exceed your typical transaction time, so as to improve the odds that the lock will be released before the waiter decides to check for deadlock. This option can only be set at server start.
Each SQL transaction has an isolation level, which can be either "read committed" or "serializable". This parameter controls the default isolation level of each new transaction. The default is "read committed".
Consult the PostgreSQL User's Guide and the command SET TRANSACTION for more information.
If a dynamically loadable module needs to be opened and the specified name does not have a directory component (i.e. the name does not contain a slash), the system will search this path for the specified file. (The name that is used is the name specified in the CREATE FUNCTION or LOAD command.)
The value for dynamic_library_path has to be a colon-separated list of absolute directory names. If a directory name starts with the special value $libdir, the compiled-in PostgreSQL package library directory is substituted. This where the modules provided by the PostgreSQL distribution are installed. (Use pg_config --pkglibdir to print the name of this directory.) For example:
The default value for this parameter is $libdir. If the value is set to an empty string, the automatic path search is turned off.
This parameter can be changed at run time by superusers, but a setting done that way will only persist until the end of the client connection, so this method should be reserved for development purposes. The recommended way to set this parameter is in the postgresql.conf configuration file.
If this option is on, the PostgreSQL backend will use the fsync() system call in several places to make sure that updates are physically written to disk. This insures that a database installation will recover to a consistent state after an operating system or hardware crash. (Crashes of the database server itself are not related to this.)
However, this operation does slow down PostgreSQL because at transaction commit it has wait for the operating system to flush the write-ahead log. Without fsync, the operating system is allowed to do its best in buffering, sorting, and delaying writes, which can considerably increase performance. However, if the system crashes, the results of the last few committed transactions may be lost in part or whole. In the worst case, unrecoverable data corruption may occur.
For the above reasons, some administrators always leave it off, some turn it off only for bulk loads, where there is a clear restart point if something goes wrong, and some leave it on just to be on the safe side. Because it is always safe, the default is on. If you trust your operating system, your hardware, and your utility company (or better your UPS), you might want to disable fsync.
It should be noted that the performance penalty of doing fsyncs is considerably less in PostgreSQL version 7.1 and later. If you previously suppressed fsyncs for performance reasons, you may wish to reconsider your choice.
This option can only be set at server start or in the postgresql.conf file.
Sets the location of the Kerberos server key file. See Section 4.2.3 for details.
Determines the maximum number of concurrent connections to the database server. The default is 32 (unless altered while building the server). This parameter can only be set at server start.
Sets the maximum expression nesting depth of the parser. The default value is high enough for any normal query, but you can raise it if needed. (But if you raise it too high, you run the risk of backend crashes due to stack overflow.)
Sets the maximum number of simultaneously open files in each server subprocess. The default is 1000. The limit actually used by the code is the smaller of this setting and the result of sysconf(_SC_OPEN_MAX). Therefore, on systems where sysconf returns a reasonable limit, you don't need to worry about this setting. But on some platforms (notably, most BSD systems), sysconf returns a value that is much larger than the system can really support when a large number of processes all try to open that many files. If you find yourself seeing "Too many open files" failures, try reducing this setting. This option can only be set at server start or in the postgresql.conf configuration file; if changed in the configuration file, it only affects subsequently-started server subprocesses.
Sets the maximum number of relations (tables) for which free space will be tracked in the shared free-space map. The default is 100. This option can only be set at server start.
Sets the maximum number of disk pages for which free space will be tracked in the shared free-space map. The default is 10000. This option can only be set at server start.
The shared lock table is sized on the assumption that at most max_locks_per_transaction * max_connections distinct objects will need to be locked at any one time. The default, 64, which has historically proven sufficient, but you might need to raise this value if you have clients that touch many different tables in a single transaction. This option can only be set at server start.
When a password is specified in CREATE USER or ALTER USER without writing either ENCRYPTED or UNENCRYPTED, this flag determines whether the password is to be encrypted. The default is off (do not encrypt the password), but this choice may change in a future release.
The TCP port the server listens on; 5432 by default. This option can only be set at server start.
Sets the number of shared memory buffers used by the database server. The default is 64. Each buffer is typically 8192 bytes. This option can only be set at server start.
Runs postmaster silently. If this option is set, the postmaster will automatically run in background and any controlling ttys are disassociated, thus no messages are written to standard output or standard error (same effect as postmaster's -S option). Unless some logging system such as syslog is enabled, using this option is discouraged since it makes it impossible to see error messages.
Specifies the amount of memory to be used by internal sorts and hashes before switching to temporary disk files. The value is specified in kilobytes, and defaults to 512 kilobytes. Note that for a complex query, several sorts and/or hashes might be running in parallel, and each one will be allowed to use as much memory as this value specifies before it starts to put data into temporary files. Also, each running backend could be doing one or more sorts simultaneously, so the total memory used could be many times the value of SORT_MEM.
This controls the inheritance semantics, in particular whether subtables are included by various commands by default. They were not included in versions prior to 7.1. If you need the old behavior you can set this variable to off, but in the long run you are encouraged to change your applications to use the ONLY keyword to exclude subtables. See the SQL language reference and the User's Guide for more information about inheritance.
Enables SSL connections. Please read Section 3.7 before using this. The default is off.
If this is true, then the server will accept TCP/IP connections. Otherwise only local Unix domain socket connections are accepted. It is off by default. This option can only be set at server start.
When turned on, expressions of the form expr = NULL (or NULL = expr) are treated as expr IS NULL, that is, they return true if expr evaluates to the NULL value, and false otherwise. The correct behavior of expr = NULL is to always return NULL (unknown). Therefore this option defaults to off.
However, filtered forms in Microsoft Access generate queries that appear to use expr = NULL to test for NULLs, so if you use that interface to access the database you might want to turn this option on. Since expressions of the form expr = NULL always return NULL (using the correct interpretation) they are not very useful and do not appear often in normal applications, so this option does little harm in practice. But new users are frequently confused about the semantics of expressions involving NULL, so this option is not on by default.
Note that this option only affects the literal = operator, not other comparison operators or other expressions that are computationally equivalent to some expression involving the equals operator (such as IN). Thus, this option is not a general fix for bad programming.
Refer to the User's Guide for related information.
Specifies the directory of the Unix-domain socket on which the postmaster is to listen for connections from client applications. The default is normally /tmp, but can be changed at build time.
Sets the group owner of the Unix domain socket. (The owning user of the socket is always the user that starts the postmaster.) In combination with the option UNIX_SOCKET_PERMISSIONS this can be used as an additional access control mechanism for this socket type. By default this is the empty string, which uses the default group for the current user. This option can only be set at server start.
Sets the access permissions of the Unix domain socket. Unix domain sockets use the usual Unix file system permission set. The option value is expected to be an numeric mode specification in the form accepted by the chmod and umask system calls. (To use the customary octal format the number must start with a 0 (zero).)
The default permissions are 0777, meaning anyone can connect. Reasonable alternatives are 0770 (only user and group, see also under UNIX_SOCKET_GROUP) and 0700 (only user). (Note that actually for a Unix socket, only write permission matters and there is no point in setting or revoking read or execute permissions.)
This access control mechanism is independent of the one described in Chapter 4.
This option can only be set at server start.
Specifies the maximum amount of memory to be used by VACUUM to keep track of to-be-reclaimed tuples. The value is specified in kilobytes, and defaults to 8192 kilobytes. Larger settings may improve the speed of vacuuming large tables that have many deleted tuples.
Specifies the TCP/IP host name or address on which the postmaster is to listen for connections from client applications. Defaults to listening on all configured addresses (including localhost).
See also Section 11.3 for details on WAL tuning.
Maximum distance between automatic WAL checkpoints, in log file segments (each segment is normally 16 megabytes). This option can only be set at server start or in the postgresql.conf file.
Maximum time between automatic WAL checkpoints, in seconds. This option can only be set at server start or in the postgresql.conf file.
Time delay between writing a commit record to the WAL buffer and flushing the buffer out to disk, in microseconds. A nonzero delay allows multiple transactions to be committed with only one fsync system call, if system load is high enough additional transactions may become ready to commit within the given interval. But the delay is just wasted if no other transactions become ready to commit. Therefore, the delay is only performed if at least COMMIT_SIBLINGS other transactions are active at the instant that a backend has written its commit record.
Minimum number of concurrent open transactions to require before performing the COMMIT_DELAY delay. A larger value makes it more probable that at least one other transaction will become ready to commit during the delay interval.
Number of disk-page buffers in shared memory for WAL logging. This option can only be set at server start.
If non-zero, turn on WAL-related debugging output on standard error.
Number of log files that are created in advance at checkpoint time. This option can only be set at server start or in the postgresql.conf file.
Method used for forcing WAL updates out to disk. Possible values are FSYNC (call fsync() at each commit), FDATASYNC (call fdatasync() at each commit), OPEN_SYNC (write WAL files with open() option O_SYNC), or OPEN_DATASYNC (write WAL files with open() option O_DSYNC). Not all of these choices are available on all platforms. This option can only be set at server start or in the postgresql.conf file.
For convenience there are also single letter option switches available for many parameters. They are described in the following table.
Table 3-1. Short option key
|-B x||shared_buffers = x|
|-d x||server_min_messages = DEBUGx|
|-F||fsync = off|
|-h x||virtual_host = x|
|-i||tcpip_socket = on|
|-k x||unix_socket_directory = x|
|-l||ssl = on|
|-N x||max_connections = x|
|-p x||port = x|
|-fi, -fh, -fm, -fn, -fs, -ft||enable_indexscan=off, enable_hashjoin=off, enable_mergejoin=off, enable_nestloop=off, enable_seqscan=off, enable_tidscan=off||*|
|-S x||sort_mem = x||*|
|-s||show_query_stats = on||*|
|-tpa, -tpl, -te||show_parser_stats=on, show_planner_stats=on, show_executor_stats=on||*|
$ postmaster -o '-S 1024 -s'
or via PGOPTIONS from the client side, as explained above.