UNIX has a number of editors that can process the contents of text files, whether those files contain data, source code, or sentences. There are line editors, such as ed and ex, which display a line of the file on the screen; and there are screen editors, such as vi and emacs, which display a part of the file on your terminal screen.
vi is the most useful standard text editor on your system. (vi is short for visual editor and is pronounced "vee-eye.") Unlike emacs, it is available in nearly identical form on nearly every UNIX system, thus providing a kind of text-editing lingua franca. The same might be said of ed and ex, but screen editors are generally much easier to use. With a screen editor you can scroll the page, move the cursor, delete lines, insert characters, and more, while seeing the results of your edits as you make them. Screen editors are very popular, since they allow you to make changes as you read through a file, much as you would edit a printed copy, only faster.
To many beginners, vi looks unintuitive and cumbersome - instead of using special control keys for word processing functions and just letting you type normally, it uses all of the regular keyboard keys for issuing commands. When the keyboard keys are issuing commands, vi is said to be in command mode. You must be in a special insert mode before you can type actual text on the screen. In addition, there seem to be so many commands.
Once you start learning, however, you realize that vi is well-designed. You need only a few keystrokes to tell vi to do complex tasks. As you learn vi, you learn shortcuts that transfer more and more of the editing work to the computer - where it belongs.
vi (like any text editor) is not a "what you see is what you get" word processor. If you want to produce formatted documents, you must type in codes that are used by another formatting program to control the appearance of the printed copy. If you want to indent several paragraphs, for instance, you put a code where the indent begins and ends. Formatting codes allow you to experiment with or change the appearance of your printed files, and in many ways, give you much more control over the appearance of your documents than a word processor. UNIX supports the nroff/troff formatting package.
(vi does support some simple formatting mechanisms. For example, you can tell it to automatically wrap when you come to the end of a line, or to automatically indent new lines.)
As with any skill, the more editing you do, the easier the basics become, and the more you can accomplish. Once you are used to all the powers you have while editing with vi, you may never want to return to any "simpler" editor.
What are the components of editing? First, you want to insert text (a forgotten word or a missing sentence), and you want to delete text (a stray character or an entire paragraph). You also need to change letters and words (to correct misspellings or to reflect a change of mind about a term). You might want to move text from one place to another part of your file. And, on occasion, you want to copy text to duplicate it in another part of your file.
Unlike many word processors, vi's command mode is the initial or "default" mode. Complex, interactive edits can be performed with only a few keystrokes. (And to insert raw text, you simply give any of the several "insert" commands and then type away.)
One or two characters are used for the basic commands. For example:
Using letters as commands, you can edit a file with great speed. You don't have to memorize banks of function keys or stretch your fingers to reach awkward combinations of keys. Most of the commands can be remembered by the letter that performs them, and nearly all commands follow similar patterns and are related to each other.
In general, vi commands:
Are not shown (or "echoed") on the screen when you type them.
Do not require a [RETURN] after the command.
There is also a group of commands that echo on the bottom
line of the screen. Bottom-line commands are preceded by
The slash (
/) and the question mark (
begin search commands, which are discussed
in Chapter 3, Moving Around in a Hurry .
A colon (
:) begins all ex commands. ex commands
are those that are used by the ex line editor.
The ex editor is available to you when you use vi, because
ex is the underlying editor, and
vi is really just its "visual" mode.
ex commands and concepts are discussed fully in
Chapter 5, Introducing the ex Editor ,
but this chapter introduces you to the
ex commands to quit a file without saving edits.
You can use vi to edit any text file. vi copies the file to be edited into a buffer (an area temporarily set aside in memory), displays the buffer (though you can see only one screenful at a time), and lets you add, delete and change text. When you save your edits, vi copies the edited buffer back into a permanent file, replacing the old file of the same name. Remember that you are always working on a copy of your file in the buffer, and that your edits will not affect your original file until you save the buffer. Saving your edits is also called "writing the buffer," or more commonly "writing your file."
vi is the UNIX command that invokes the vi editor for
an existing file or for a brand new file.
The syntax for the
vi command is:
The brackets shown on the above command line indicate that the
filename is optional.
The brackets should not be typed.
$ is the UNIX prompt.
If the filename is omitted,
vi will open an unnamed buffer.
You can assign the name when you write the buffer into a file.
For right now, though,
let's stick to naming the file on the command line.
A filename must be unique inside its directory. On a System V UNIX system, it cannot exceed 14 characters in length (Berkeley UNIX systems allow much longer names). A filename can include any ASCII character except a slash (/), which is reserved as the separator between files and directories in a pathname. You can even include spaces in a filename by typing a backslash (\) before the space. In practice, though, filenames generally consist of any combination of uppercase and lowercase letters, numbers, and the characters dot (.) and underscore (_). Remember that UNIX is case-sensitive: lowercase letters are distinct from uppercase letters. Also remember that you must press [RETURN] to signal to UNIX that you are finished issuing your command.
Since this is a new file, the buffer is empty and the screen appears as follows:
~ ~ ~ "practice" [New file].
The tildes (~) down the left-hand column of the screen indicate that there is no text in the file, not even blank lines. The prompt line (also called the status line) at the bottom of the screen echoes the name and status of the file.
You can also edit any existing text file in a directory by specifying its filename. Suppose that there is a UNIX file with the pathname /usr/john/letter. If you are already in the /usr/john directory, use the relative pathname. For example:
If you are in another directory, give the full pathname to begin editing:
Your terminal type is probably incorrectly identified.
Quit the editing session immediately by typing
:q and ask your
system administrator to provide an adequate terminal type setting.
Visual needs addressable cursor or upline capability Bad termcap entry Termcap entry too long terminal: Unknown terminal type Block device required Not a typewriter
Your terminal type is either undefined, or there's probably something
wrong with your termcap or terminfo entry.
:q to quit. Then ask your system administrator to select
a terminal type for your environment.
[new file]message appears when you think a file already exists.
You are probably in the wrong directory.
:q to quit. Then check to see that you are in the
correct directory for that file (enter
pwd at the UNIX prompt).
If you are in the right directory, check the list of files in the directory (with
to see whether the file exists under a slightly different name.
[Read only] File is read only Permission denied
"Read only" means that you can only look at the file; you cannot
save any changes you make.
You may have invoked vi in view mode (with
vi -R), or you do not have write permission for the file.
See the section "Problems Saving Files" below.
Bad file number Block special file Character special file Directory Executable Non-ascii file file non-ASCII
The file you've called up to edit is not a regular text file.
:qbecause of one of the above difficulties, the message appears:
No write since last change (:quit! overrides).
Let's assume that you do create a file called practice to
practice vi commands, and that you type in six lines of text.
To save the file, first check that you are in
command mode by pressing
[ESC] and then enter
"practice" [New file] 6 lines, 320 characters
Give the write and save command,
ch01 ch02 practice
Listing the files in the directory shows the new file practice that you created.
You can also save your edits with
ex commands. Type
:w to save your file but not quit
:q to quit if you haven't made any edits; and
:wq to both quit and save your edits.
:wq is equivalent to
We'll explain fully how to use commands in Chapter 5,
Introducing the ex Editor; for
now, you should just memorize a few commands for writing and saving