This appendix contains the form used to register your in-addr.arpa domain with ARIN, the American Registry for Internet Numbers. For the most current version of this form, see http://www.arin.net/templates/inaddrtemplate.txt.
03/98 **************** Please DO NOT REMOVE Version Number ****************** IN-ADDR Version Number: 1.0 ************* Please see attached detailed instructions *************** Registration Action Type 0. (N)ew (M)odify (D)elete: Network Information 1a. Network Name..................: 1b. Start of Network Block........: 1c. End of Network Block..........: 2a. Name of Organization..........: 2b. Postal address of Organization: Technical Contact 3a. ARIN-Handle (if known)........: 3b. Name (Last, First)............: 3c. Organization..................: 3d. Postal Address................: 3e. Phone Number..................: 3f. E-Mail Address................: Primary Name Server 4a. Primary Server Hostname.......: 4b. Primary Server Netaddress.....: Secondary Name Server(s) 5a. Secondary Server Hostname.....: 5b. Secondary Server Netaddress...: 6. Comments......................: ------------------------------- cut here --------------------------------- GENERAL INSTRUCTIONS: REGISTERING INVERSE ADDRESSING (NAME MAPPING) WITH ARIN The Internet uses a special domain to support gateway location and Internet address to host mapping called In-ADDR.ARPA. The intent of this domain is to provide a guaranteed method to perform host address to host name mapping, and to facilitate queries to locate all gateways on a particular network in the Internet. Whenever an application is used that requires user identification, i.e., ftp, or remote login, the domain must be registered in the IN-ADDR.ARPA zone or the application will be unable to determine the origin of the IP. IN-ADDR domains are represented using the network number in reverse. EXAMPLE: The IN-ADDR domain for network 220.127.116.11 is represented as 67.45.123.IN-ADDR.ARPA. NOTE: Please do not list your network number in reverse on your template. Use the above template for registering new IN-ADDR entries, making changes to existing IN-ADDR records, and removing inverse-address mapping from the ARIN database and root servers. The IN-ADDR template should be submitted via E-mail to ARIN at: firstname.lastname@example.org In order to ensure prompt and accurate processing of IN-ADDR requests, follow precisely the instructions below. Please do not modify the template nor remove the version number. IN-ADDR templates are automatically parsed. Errors in a template result in the template being returned for correction. Please send only one template per message. In the Subject of the message, use the words: NEW IN-ADDR, MODIFY IN-ADDR, or REMOVE IN-ADDR, as appropriate. Please do not send hardcopy registrations to ARIN. If you do not have an E-mail connection, you should arrange for your Internet Service Provider (ISP) to send E-mail applications to ARIN on your behalf. When you submit a template, you will receive an auto-reply from ARIN with a ticket number. The ticket number format is: ARIN -<year><month><day>.<queue position>. Use the ticket number in the Subject of any message you send regarding a registration action. When the registration has been completed, you will be notified via E-mail. All ISPs receiving from ARIN /16 CIDR blocks (Class B) which are greater than or equal to (>= )256 Class C's) will be responsible for maintaining all IN-ADDR.ARPA domain records for their respective customers. The ISP is responsible for the maintenance of IN-ADDR.ARPA domain records of all longer prefixes that have been delegated out of that block. DETAILED INSTRUCTIONS FOR COMPLETING EACH IN-ADDR TEMPLATE FIELD Section 0. Registration Action Type N) New (M) Modify (D) Delete: (N) New: For new IN-ADDR registration, place an N after the colon. (M) Modify: To modify/change an EXISTING record IN-ADDR registration, place an M after the colon. When "M" is selected, the current records will be replaced with the information listed in the template. Please provide a complete list of name servers in the order in which they should appear on the record. If the modification involves first registering a person or name server(s) not entered in the database, the instructions for completing Sections 2, 3, 4 and 5 apply. Search the WHOIS database for more information if you are unsure of the current information for the technical POC or name server(s). The requested changes will be made if ARIN registry personnel determine that the modification request was issued by an authorized source. The issuing source may be a listed contact for the domain, others in the same organization, the current provider, or a new provider initiating network support. (D) Delete. To delete an existing IN-ADDR from your network record, place a D after the colon. List the IN-ADDR server and IP number and it will be deleted. The host entry will still exist in the global host tables. Section 1. Network Record Information. 1a. Network Name. Please supply the network name. NOTE: The network name is not the domain name. To verify an existing Network Name, use the searchable WHOIS database. The Network Name is used as an identifier in Internet name and address tables. To create a network name, supply a short name consisting of a combination of up to 12 numbers and letters for the network. You may use a dash (-) as part of the Network Name, but no other special characters. Please do not use periods or underscores. 1b./1c. Start/End of Network Block. 1b. Start of Network Block. If the network record is for a single network, enter the IP address of the single network here. Item 1c is then left blank. If the record is a block of IP addresses, enter the IP address of the start of the network block. 1c. End of Network Block. If the network record is a block of IP addresses, Item 1c will be the last IP address of the network block. If you received a block of IP addresses from your ISP, there may already be IN-ADDR servers on the parent block held by that provider. Please query your ISP before submitting an IN-ADDR request. Section 2. Name and Postal Address of Organization. 2a. Name of Organization. The network is considered to be registered to an organization, even if the "organization" is an individual. If you are an ISP submitting this request on behalf of your customer, please provide here the name and postal address of the organization that uses the IP address(es). 2b. Postal Address of Organization. This is the physical address of the organization. Place the city, state, and zip code together on the same line below the Street Address or Post Office Box. Use a comma to separate the city and state. Do not insert a period following the state abbreviation. To change an address, please provide the new address information in this item, and flag the change in Section 6: Comments. EXAMPLE: 111 Town Center Drive Herndon, VA 22070 If the organization is located in a country other than the United States, please include the two-letter country code on the last line by itself. EXAMPLE: 161 James Street Montreal, QC H2S 2C8 CA For the country entry, please use the two-letter country code found at: URL: [ftp://rs.arin.net/netinfo/iso3166-countrycodes] NOTE: If you wish to make a change to an existing registered physical address of an organization, please note the change you want in Section 6: Comments. Section 3. Technical Contact The technical point of contact (POC) is the person responsible for the technical aspects of maintaining the network's name servers. The POC should be able to answer any utilization questions ARIN may have. 3a. User Handle (if known) Each person in the ARIN database is assigned a user handle, which is a unique tag consisting of the user's initials and a serial number. This tag is used in database records indicate a POC for a domain name, network, name server or other entity. Each user should have only one handle. If the user handle is known, insert the handle in Item 3a and leave the rest of Section 3 blank. If the user's handle is unknown or the user has never been registered, leave Item 3a blank. The user's database record will be updated with any new information on the template. 3b. Name (Last, First) Enter the name of the Technical Contact in the format: Last Name, First Name. Separate first and last names by a comma. 3c. Organization. Provide the name of the organization with which the Technical Contact is affiliated. Refer to the instructions for Item 2a. 3d. Postal Address. Refer to the instructions for Item 2b. Section 4. Primary Name Server. Networks are required to provide at least two independent servers for translating address to name mapping for hosts in the domain. The servers should be in physically separate locations and on different networks, if possible. The servers should be active and responsive to domain name server (DNS) queries prior to submission of this application. ARIN requires that you provide complete information on your primary and secondary servers in order to process your registration request. Incomplete information in sections 4 and 5, or inactive servers will result in the return of the registration request. NOTE: To change the name or the number of a registered name server, submit a separate IN-ADDR template requesting a modification of your IN-ADDR registration. Do this by placing an M after the Modify command in Section 0: Registration Action Type. New IN-ADDR registrations cannot be used to change the name or the number of a registered name server. 4a. Primary Name Server Hostname. Please provide the fully-qualified name of the machine that is to be the name server. EXAMPLE: Use "machine.domainame.com" not just "machine" or just "domainame.com" Many reverse-authentication programs will not search for the nameserver if only the domain name is listed. 4b. Primary Name Server Netaddress. It is suggested that the fourth octet of an IP address of a server should be neither 0 nor 255. The remaining 254 numbers in the fourth octet of the IP address are valid. Section 5. Secondary Name Server(s) 5a./5b. Secondary Name Server Hostname/Secondary Name Server Netaddress. Please refer to the instructions and examples in Items 4a./4b. above. Copy Section 5 as needed to include all Secondary Name Servers. Do not renumber or change the copied section. A maximum of six domain name servers may be added to a network record. Section 6. Comments. Please use Section 6 to provide ARIN with all comments and any additional detailed updates relevant to your IN-ADDR registration not provided in Sections 0 through 5. Please provide a brief explanation for changing an organization name or point of contact information.